 Clean Out Port |
||
 
The DRIPLOC Pail System is our most commonly used solution for grease containment. The Pail System adapts to the grease drain found on the many different styles of exhaust fans. You can view it’s various adaptations.
On average, the pail needs to be replaced during regular hood cleanings depending on the volume of the restaurant. The original adapters and hose stay, while the new pail is connected taking less than a minute to re-install. It is very easy and clean to take the pail off/on the roof making it the preferred system for hood cleaners.
The DRIPLOC Pail System has the custom manufactured filter medium inside the pail. The pail has 16 drain holes allowing water to pass through it at a high volume. During cleanings, hood cleaners are encouraged to keep the DRIPLOC Pail connected to the drain and “wash the dirty water and grease through the old filter while cleaning” and before installing a new filter, which helps prevent a dirty mess and EPA violations. The DRIPLOC Rack System is our second most commonly used containment system due to it’s versatility and adaptability. The Rack System adapts to the grease drain found on the many different styles of exhaust fans. You can view it’s various adaptations.
The DRIPLOC Rack System has the custom manufactured filter (aka “pillow”) inside the rack. The rack has a built in drain that allows water to pass through the system at a high volume. During cleanings, hood cleaners are encouraged to keep the old filter in the rack system in place while “washing the dirty water and grease through the old filter” while cleaning and before installing a new filter, which helps prevent a dirty mess and EPA violations. During installation only, the Rack System is usually screwed The replacement pillow is packaged in a plastic sack. DRIPLOC recommends placing the old filter in the plastic sack to make the replacement as clean and easy as possible. For extreme volume fans, DRIPLOC has custom manufactured the “Double Deep Rack System” which has twice the absorption capacity as the original DRIPLOC Rack System. Customers are encouraged to purchase the original Rack System first. If the volume of the grease exceeds the original Rack System, DRIPLOC will send you a “Double Deep Rack System.
The DRIPLOC LV Box System is designed for fans that do not create a significant amount of grease, but still need grease containment. The LV Box System screws into the vent or curb under grease drain found on the many different styles of exhaust fans. The DRIPLOC LV Box System has the custom manufactured filter (aka “small pillow”) inside the box. The box is not completely sealed on the corners which acts as a drainage system allowing water to pass through the system at a high volume. During cleanings, hood cleaners are encouraged to keep the small filter or pillow in the LV Box in place while “washing the dirty water and grease through the filter while cleaning” and before installing a new pillow, which helps prevent a dirty mess and EPA violations. After the initial installation of the LV Box, only the small pillow (filter) needs to be replaced depending on the volume of grease created by that fan. The pillows are inexpensive making this option one to consider for your restaurants. The replacement small pillow is packaged in a plastic sack. DRIPLOC recommends placing the old pillow in the plastic sack to make the replacement as clean and easy as possible. |
into the vent or curb under the drain spout for the exhaust fan. After the initial installation of the rack, only the pillow (filter) needs to be replaced during regular scheduled hood cleanings depending on the volume of the restaurant. The pillows are inexpensive making this option one to consider for your restaurants.
DRIPLOC Hinge Kits are easily installed (10 minutes) by hood cleaners on exhaust fans to allow hood cleaners the necessary access to the exhaust system to clean it appropriately. Furthermore, DRIPLOC Hinge Kits will help prevent costly repairs to exhaust fan. For installation instructions, visit http://www.driploc.com/install.php
DRIPLOC Hinge Kits allow the exhaust fan to be lifted back and supported during quarterly cleanings. Hood cleaners are forced to wrestle with the fan bowl and set it to the side of the vent. As a result, fan bowls are damaged, fans are knocked off balance, and wires are damaged. Even the most careful hood cleaners are prone to accident and without hinge kits installed, exhaust fans become unnecessarily vulnerable to these types of accidents.
DRIPLOC hinges work and they are one of the most affordable hinge kit on the market. The DRIPLOC Hinge Kit comes with the hinges, chains, and screws to install during a nightly cleaning. One DRIPLOC Hinge Kit will be necessary for each exhaust fan. It only takes 10 minutes to install. For installation instructions, visit http://www.driploc.com/install.php
All DRIPLOC hinges are made of heavy duty steel in order to last for years and to support the weight of most any exhaust fan. And most of all, because of their design, DRIPLOC hinges are the easiest on the market to install. Time equals money.
If you order the DRIPLOC Hinge Kit and are not completely satisfied with it’s performance, send it back and we will refund your money, GUARANTEED!
Our approach is accurate and proven to be successful. For more information contact us toll free at 1-877-DRIPLOC Find out more, GET ACQUAINTED KITS AVAILABLE |
(Strong Enough to go Through Stainless Steel)
Hood cleaners across the U.S. are using our GRIPLOC Magnets because they are effective, and they save them time and money for the long haul. Because we deal directly with hood cleaners from all over, we have numerous application photos and ideas on ways to improve the efficiency of your vent hood cleaning. See below. The 360 Roof Perimeter installation instructions can be found at http://www.driploc.com/install.php In addition, DRIPLOC has a GET ACQUAINTED KIT that hood cleaners should consider when ordering your magnets to save you money. View the GET ACQUAINTED KITS.
DRIPLOC is so confident that once you use our GRIPLOC Magnets, you will only order more that we offer you our guarantee. If you don’t like our product, send it back and we’ll refund your money, guaranteed.
They are used by vent hood cleaners to quickly hang plastic during the job on metallic and many non-metallic surfaces.
The magnets used in the GRIPLOC System have, on average, 200 times the pulling force of the regular magnets.
Even when you encounter low-grade Stainless Steel and many other non-metallic surfaces, by using two GRIPLOC Magnets together you have the power to pull through the surface and hang the plastic just as well
Regular magnets are very brittle and after repeated use they will chip, crack and break. The magnets used in GRIPLOC System are incased in an industrial aluminum case that protects them from damage. The aluminum case also gives you the leverage needed to easily handle and remove the magnets from surfaces.
Hood cleaners don’t lose GRIPLOC Magnets. First of all, they are big enough that they are not easily misplaced. Secondly and more importantly, your spray techs will NOT lose them because he will NOT want to be without them. If he lost these magnets, it would be like him losing his spray wand. He won’t want to lose these magnets. |
