|
|
|
|
Installation Photos
|
PVC DRAIN ADAPTOR |
1.
Use the PVC drain adaptor with this style fan.
 |
2. Slide the drain adaptor over drain tube.
 |
3. Tighten the clamp.
 |
4. Insure the bucket hose clamp is in place and slide
the bucket hose on the PVC fitting.
 |
5. Tighten all clamps.
 |
6. Remove the wrap from the container exposing 16 water drain holes.
 |
7. Remove the plastic from the lid hole.
 |
8. Measure and cut the hose allowing 2-3 inches extra for inside of
the pail.
 |
9. Place the hose inside of the pail.
 |
10. All done.
 |
|
|
